Specifications — GTX series rotor pump filling machines

All figures below are the manufacturer's published data. For gear pump and screw down-press fillers, specifications are confirmed per project — this page does not invent numbers.

Table 1 — GTX series models (published manufacturer data)
Model	Rotor pump	Fill range	Power	Positioning
GTX-900	LX-9	5 – 50,000 ml	0.75 / 1 kW	Small to medium fills
GTX-1800	LX-18	5 – 100,000 ml	1 / 1.75 kW	Best-selling model
GTX-3000 / 3600	LX-36	10 – 200,000 ml	1.5 / 2.25 kW	Medium to large fills
GTX-6000	LX-60	20 – 300,000 ml	2.3 / 3.05 kW	Very large fills, custom

Also available: automatic single-head and multi-head machines, eight-head automatic machines with an independent servo on each head, twin-head fill-and-top-up machines, and semi-automatic four-head machines.

Table 2 — Core technical data

Parameter	Value / description
Filling accuracy	±0.5% (error ≤1 g) on pure liquids; ±1 g–±2 g measured on particle-containing or high-viscosity products
Viscosity coverage	≈50 cSt (milk) to 300,000 cSt (bean paste)
Suitable products	Pure liquids / pastes / sauces with particles / large-particle solids
Drive	Servo
Cleaning capability	CIP-capable rotor pump production (dairy / aseptic conditions)
Wetted materials	304 / 316L stainless steel, project dependent
Modular configuration	Pump head (three-lobe / single-lobe / waist / twin-lobe / five-lobe) × hopper (standard / agitated / heated / square-mouth) × filling valve (blow-spray / full-immersion / sauce cut-off)

Note: accuracy and viscosity figures are the company's published statements. For a specific project the accepted values are confirmed in the technical agreement and acceptance test. Ask us for project-specific data →

Other product lines — selection advice (no published data)

Gear pump filling machines: for low-viscosity fluids such as milk and beverages. Fill range and power are confirmed on enquiry.
Screw down-press fillers: suitability depends on the product sample; assessed before quotation.
Custom filling lines: line speed, number of stations and downstream equipment are calculated from your requirements.

Read the selection guide first, or contact us with your product and output data.

Request the full specification sheet

Drawings, utility requirements and acceptance criteria are provided with the quotation.

[email protected]